top of page

OPERATING INFORMATION.

Essential information about the equipment, its connections, the steam-thawing process and important handling considerations.

01 / AT A GLANCE

BUILT FOR SIMPLE FIELD OPERATION.

Arctic Blaster is a compact steel steam generator heated by an external propane torch. It uses clean water and purpose-built delivery hoses to put steam where frozen infrastructure needs thawing, without an electrical power connection.

2 US GAL

38 LB

2 × 50 FT

0

VESSEL CAPACITY
EMPTY VESSEL WEIGHT
HOSES IN STANDARD KIT
ELECTRIC POWER REQUIRED

01

ADD WATER.

Fill the vessel with clean water to the approved level.

02 / PROCESS OVERVIEW

02

HEAT WITH PROPANE.

Use an external propane torch as specified to generate steam.

03

DIRECT STEAM.

Connect the hose and guide steam to the frozen area.

04

RESTORE FLOW.

Targeted steam helps melt ice and return flow.

FOUR SIMPLE STEPS.

03 / HOSES & FITTINGS

CONFIGURE THE RIGHT REACH.

Blue and black Arctic Blaster hose assemblies

The standard kit contains a 50 ft, 1/4-inch line and a 50 ft, 3/8-inch line with couplers. The lineup also includes a 25 ft extension, a PEX kit, and a new 100 ft sewer hose.

04 / IMPORTANT INFORMATION

SAFETY COMES FIRST.

Hot steam and metal surfaces. Protect against burns and scalds, and keep people clear of the steam discharge.

Propane and open-flame heating. Follow approved torch instructions and safe-use practices for fuel, ventilation and placement. Never operate a torch in an unsafe or confined environment.

Pressure and hose compatibility. Use only approved connections and hose arrangements; never obstruct the steam path or bypass pressure-protection features.

Plastic piping and other materials. Use additional care near fittings, susceptible materials and confined areas. Check whether the application is suitable before starting.

Cooling and servicing. Do not open caps or disconnect pressurized, hot components. Follow the manufacturer’s complete safe shut-down and cooling procedure.

05 / UPDATED REFERENCE DIAGRAM

THE VESSEL, EXPLAINED.

Reference schematic only. Always follow the approved operating instructions supplied with your equipment.

TECHNICAL REFERENCE DRAWINGS

Select a drawing to open the original at full size. These drawings support the operating information supplied with your equipment. Contact Arctic Blaster if you need help identifying the correct instructions for your unit.

06 / CARE & PREPARATION

READY FOR THE NEXT FREEZE-UP.

Inspect the steel vessel, hoses, couplers, torch and fittings before use. After use, follow the approved shutdown, depressurization, draining and winter storage procedure. Replace damaged components and keep operating documents accessible for every operator.

READY FOR WHAT'S NEXT?

NEED HELP WITH YOUR SETUP?

Speak with the Arctic Blaster team about compatible equipment, attachments, and your intended application.

bottom of page